SATO CL4NX Operator's Manual page 165

Remove
Tools > HEX-Dump > Log Files > Remove
Delete the log files of the printer.
The procedures to delete the log files are as follows:
1. Select the file type to delete.
• buff/: The buffer data saved after you perform the Buffer Dump.
• hexdump/: The received data created through Hex Dump Mode.
2. Select the file to delete and press the
on the right side of the file name.
3. After you select the file, press the right soft button to delete the
selected file.
Print
Tools > HEX-Dump > Log Files > Print
Perform a dump print of the log files of the printer.
The procedures to print the log files are as follows:
1. Select the file type to print.
• buff/: The buffer data saved after you perform the Buffer Dump.
• hexdump/: The received data created through Hex Dump Mode.
2. Select the file to print and press the
to perform the dump print.
Select
Tools > Reset > Select
Select the items to initialize.
The items are as follows:
1 Data
2 Data & Settings
3 Settings
button. A check mark shows
button or the right soft button
Initialize the data saved in the printer.
Initialize the data and setting values of the
printer.
Initialize the setting values of the printer.
4 Operation and Configuration
CL4NX Operator Manual
163