SATO CL4NX Operator's Manual page 110

4 Operation and Configuration
Privacy Protocol
Interface > Network > Services > SNMP > Agent > Read-Only > Privacy
Protocol
Set the authentication privacy protocol.
Shows only if you have selected Privacy in the User Security menu.
The options are as follows:
• DES
• AES
Privacy Passphrase
Interface > Network > Services > SNMP > Agent > Read-Only > Privacy
Passphrase
Set the authentication privacy passphrase.
Shows only if you have selected Privacy in the User Security menu.
You can enter alphabetic, numeric and symbolic characters in the range of
8 to 32 characters.
Initial setting: mypassword
Read-Write
Interface > Network > Services > SNMP > Agent > Read-Write
Set the Read-Write function.
The setting items are as follows:
1 Community
2 User
3 User Security
4 Authentication
Protocol
5 Authentication
Passphrase
6 Privacy Protocol
7 Privacy Pass-
phrase
108
CL4NX Operator Manual
Set the community name of Read-Write.
Set the user name of Read-Write.
Set the security level of Read-Write.
*Shows only if User is not empty.
Set the authentication protocol.
*Shows only if you have selected Authentica-
tion or Privacy in the User Security menu.
Set the authentication passphrase.
*Shows only if you have selected Authentica-
tion or Privacy in the User Security menu.
Set the authentication privacy protocol.
*Shows only if you have selected Privacy in
the User Security menu.
Set the authentication privacy passphrase.
*Shows only if you have selected Privacy in
the User Security menu.