Optional Uhf Rfid Configuration - SATO CL4NX Operator's Manual

7.5 Optional UHF RFID Configuration

This chapter explains the procedures on how to configure the printer to encode your inlays.
1
Examine the media to determine the
printer settings.
Refer to the CL4NX UHF Inlay Configuration
Guide for the measurements you should take and
what they mean, as well as a list of inlays and
their required configurations.
2
Press the power button on the
operator panel for more than one second
to power on the printer.
3
When the printer is in online mode, press
the button on the operator panel to
change to offline mode.
4
Press the button to show the Settings
menu.
5
Press the / buttons to select
Interface and then press the
6
Press the / buttons to select RFID
and then press the
The RFID screen shows.
button.
button.
7 Appendix
CL4NX Operator Manual
225