Connecting to a Computer
[Standard Interface]
¡USB + LAN type
(1)When using a USB interface, set DSW 1-8 inside the front cover
to OFF.
When using a LAN interface, set DSW 1-8 inside the front cover
to ON.
(2)To set the USB interface printing support settings or LAN
interface reception mode settings, set DSW 3-2 of the circuit
board on the bottom of the printer.
For details regarding dip switch settings, refer to [Dip Switch
Settings].
/Page 29~31
¡USB + RS-232C type
(1)When using a USB interface, set DSW 1-8 inside the front cover
to OFF.
When using an RS-232C interface type, set DSW 1-8 inside the
front cover to ON.
(2)To set the RS-232C interface conditions, set DSW2 of the circuit
board on the bottom of the printer.
(3)To set the USB interface printing support settings, set DSW 3-2 of
the circuit board on the bottom of the printer.
For details regarding dip switch settings, refer to [Dip Switch
Settings].
/Page 29~31
USB interface
LAN interface
USB interface
RS-232C interface type
23