Log Files - SATO CL4NX Operator's Manual

4 Operation and Configuration
Buffer Dump
Tools > HEX-Dump > Buffer Dump
Save the receive buffer data to the printer.
Available only if you have set to Disabled in the Hex Dump Mode menu.
Press the Start (right soft) button on the startup screen to save the data to
the printer.
Save the receive buffer data to "buff/".
Notes:
• The data files of the receive buffer are created for each type of inter-
face.
• The details of the file created inside "buff/" are as follows:
• BT0001.bin: Received data through Bluetooth.
• LAN0001.bin: Received data through LAN.
• LPT0001.bin: Received data through IEEE1284.
• SCI0001.bin: Received data through RS-232C.
• USB0001.bin: Received data through USB.
• If you perform the Buffer Dump again, the existing file will be overwrit-
ten.

Log Files

Tools > HEX-Dump > Log Files
The setting items are as follows:
1 Copy
2 Remove
3 Print
Copy
Tools > HEX-Dump > Log Files > Copy
Copy the log files of the printer to the USB memory.
Available only if you have installed the USB memory.
The procedures to copy the log files are as follows:
1. Select the file type to copy.
• buff/: The buffer data saved after you perform the Buffer Dump.
• hexdump/: The received data created through Hex Dump Mode.
2. Select the file to copy and press the
on the right side of the file name.
3. After you select the file, press the right soft button to copy the selected
file to the USB memory.
162
CL4NX Operator Manual
Copy the log files of the printer to the USB
memory.
* Available only if you have installed the USB
memory.
Delete the log files of the printer.
Do a dump print of the log files of the printer.
button. A check mark shows