SATO CL4NX Operator's Manual page 89

IPv4
Interface > Network > Settings > IPv4
Set IPv4. The setting items are as follows:
1 Mode
2 DHCP
3 IP Address
4 Netmask
5 Gateway
6 DNS
CAUTION:
After setting, press the right soft button to enable the new setting. Press
the left soft button to cancel the new setting and return to the previous set-
ting.
Mode
Interface > Network > Settings > IPv4 > Mode
Select the setting mode of the IP address.
The options are as follows:
• DHCP: Automatically retrieve the IP address, gateway and subnet
mask from the DHCP server.
• Static: Manually set the IP address, gateway and subnet mask.
Select the setting mode of the IP address.
Update the lease time of the IP address.
*Shows only if you have selected DHCP in
Mode menu.
Set and check the IP address.
If you have selected DHCP in Mode menu, the
screen shows the IP address you received from
the DHCP server.
If you have selected Static in Mode menu,
select to set the IP address.
Set and check the subnet mask address.
If you have selected DHCP in Mode menu, the
screen shows the subnet mask address you
received from the DHCP server.
If you have selected Static in Mode menu,
select to set the subnet mask address.
Set and check the default gateway address.
If you have selected DHCP in Mode menu, the
screen shows the gateway address you
received from the DHCP server.
If you have selected Static in Mode menu,
select to set the default gateway address.
Set and check DNS server addresses.
If you have selected Static in Mode menu,
select to set and check DNS server addresses.
4 Operation and Configuration
CL4NX Operator Manual
87