4 Operation and Configuration
Destination 1
Interface > Network > Services > SNMP > Traps > Destination 1
Set the address of the Traps Destinations.
Destination 2
Interface > Network > Services > SNMP > Traps > Destination 2
Set the address of the Traps Destinations.
Shows only if you have selected 2 or 3 in the Destination menu.
Destination 3
Interface > Network > Services > SNMP > Traps > Destination 3
Set the address of the Traps Destinations.
Shows only if you have selected 3 in the Destination menu.
Community
Interface > Network > Services > SNMP > Traps > Community
Set the Traps community name.
Shows only if you have selected 1 or 2c in the SNMP Version menu.
You can enter alphabetic, numeric and symbolic characters in the range of
1 to 32 characters.
Initial setting: trapcom
113
CL4NX Operator Manual