Cleaning Interval - SATO CL4NX Operator's Manual

4 Operation and Configuration
Clean Printhead
System > Notifications > Clean Printhead > Clean Printhead
Enable or disable the notification function about when the print head needs
to be cleaned.
The options are as follows:
• Enabled: Enable the notification function.
• Disabled: Disable the notification function.

Cleaning Interval

System > Notifications > Clean Printhead > Cleaning Interval
Set the notification interval about when the print head needs to be cleaned.
Available to change only if you have selected Enabled in the Clean Print-
head menu.
The printer shows the print distance as a setting value.
The setting range is 10 to 1000 m.
Change Printhead
System > Notifications > Change Printhead
Notify when the print head needs to be replaced.
The setting items are as follows:
1 Change Printhead
2 Printhead Interval
3 Printhead Count
Change Printhead
System > Notifications > Change Printhead > Change Printhead
Enable or disable the notification function about when the print head needs
to be replaced.
The options are as follows:
• Enabled: Enable the notification function.
• Disabled: Disable the notification function.
150
CL4NX Operator Manual
Enable or disable the notification function about
when the print head needs to be replaced.
Set the notification interval about when the print
head needs to be replaced.
Shows the current print distance.