Details Of The Settings Menu Screen; Printing Menu - SATO CL4NX Operator's Manual

4 Operation and Configuration

4.4 Details of the Settings Menu Screen

4.4.1

Printing Menu

The following settings are available in the Printing menu:
Printing
1 Label Length
2 Label Width
3 Auto Measure
4 Ribbon
5 Ribbon Near End
6 Speed
7 Sensor Type
8 Auto-mode
9 Print Mode
10 Backfeed
11 Eject Cut
12 Darkness Range
13 Darkness
14 Imaging
15 Advanced
68
CL4NX Operator Manual
Set the length of the media.
Set the width of the media.
Automatically measure the length of the media.
Set whether to print using a ribbon or direct
thermal paper.
Enable or disable the warning when the ribbon
is about to run out.
*Shows only if you have selected Use Ribbon
in the Ribbon menu.
Set the print speed.
Set the media sensor type.
Automatically set the print mode.
Manually set the print mode.
Set the backfeed.
Set the time from the print completion until the
print cut.
*Shows only if you have selected Cut & Print
in the Print Mode menu.
Set the range of the print darkness.
Set the print darkness.
Set the print reference position in the vertical
and horizontal directions.
Set the sensor operation and print motion.