5 Cleaning and Performing Printer Adjustments
6
Clean the bottom of the media sensor
guide using the cotton cloth dabbed with
cleaning liquid.
7
Return the media sensor guide to its
original position and tilt the sensor
guide lock up to the locked position.
5.2.2
Maintenance using the Cleaning Sheet
The maintenance procedures using the cleaning sheet are as follows:
1
Make sure that the printer is in power off
mode, then disconnect the power cord
from the AC outlet.
2
Open the top cover.
CAUTION
Open the top cover fully to prevent accidental drop of
the cover.
3
Turn the head lock lever clockwise to
unlock the print head.
CAUTION
• The print head and its surroundings are hot after
printing. Be careful not to touch it, to avoid being
burned.
• Touching the edge of the print head with your bare
hand could cause injury.
178
CL4NX Operator Manual
1