SATO CL4NX Operator's Manual page 104

4 Operation and Configuration
Services
Interface > Network > Services
Set the port for connection, NTP, LPD, FTP or SNMP.
The setting items are as follows:
1 Ports
2 NTP
3 LPD
4 FTP
5 SNMP
Ports
Interface > Network > Services > Ports
The setting items are as follows:
1 Port1
2 Port2
3 Port3
4 Flow Control
5 BCC
Port1
Interface > Network > Services > Ports > Port1
Set the port number.
The setting range is 1 to 65535.
Each port (1, 2 and 3) must be set to different values.
102
CL4NX Operator Manual
Set the port number.
Set the functions for NTP.
Set the functions for LPD.
Set the functions for FTP.
Set the functions for SNMP.
Set the port number.
Set the port number.
Set the port number.
Set the communication protocol.
Set the functions for BCC.
*Shows only if you have selected Status5 in
the Flow Control menu.