SATO CL4NX Operator's Manual page 109

User
Interface > Network > Services > SNMP > Agent > Read-Only > User
Set the user name as Read-Only.
You can enter alphabetic, numeric and symbolic characters in the range of
0 to 32 characters.
To disable, keep this field blank.
Initial setting: rouser
User Security
Interface > Network > Services > SNMP > Agent > Read-Only > User
Security
Set the security level as Read-Only.
*Shows only if User is not empty.
The options are as follows:
• None
• Authentication
• Privacy
Authentication Protocol
Interface > Network > Services > SNMP > Agent > Read-Only > Authenti-
cation Protocol
Set the authentication protocol.
Shows only if you have selected Authentication or Privacy in the User
Security menu.
The options are as follows:
• MD5
• SHA
Authentication Passphrase
Interface > Network > Services > SNMP > Agent > Read-Only > Authenti-
cation Passphrase
Set the authentication passphrase.
Shows only if you have selected Authentication or Privacy in the User
Security menu.
You can enter alphabetic, numeric and symbolic characters in the range of
0 to 32 characters.
Initial setting: mypassword
4 Operation and Configuration
CL4NX Operator Manual
107