Control Code - SATO CL4NX Operator's Manual

4 Operation and Configuration
STCL
Applications > STCL
To use STCL as the printer command, set the items as follows:
1 Command Head
Command Head
Applications > STCL > Command Head
Set the command head.
The setting items are as follows:
1

Control Code

2 1st Byte Code
3 2nd Byte Code
4 3rd Byte Code
5 Font Setting
Control Code
Applications > STCL > Command Head > Control Code
Set the control code.
The options are as follows:
• AUTO: Perform the protocol detection automatically.
• ESC|LF|NUL
• 7B|7C|7D
• CUSTOM: Change the first to third byte codes.
1st Byte Code
Applications > STCL > Command Head > 1st Byte Code
Set the first byte code.
You can change the code only if you have selected CUSTOM in the Con-
trol Code menu.
The setting range is 0 to 255.
142
CL4NX Operator Manual
Set the command head.
Set the control code.
Set the first byte code.
Set the second byte code.
Set the third byte code.
Set the font.