3-3. Replacement of Main Parts
3-3-1. T Soft Brake Assembly Replacement
3-3. Replacement of Main Parts
3-3-1. T Soft Brake Assembly Replacement
Outline
Replacement
T soft brake assembly removal
T reel table cleaning
T soft brake assembly installation
Adjustment after replacement
Brake torque confirmation
Preparations
1. Confirm that the unit is in the unthreading end state.
2. Turn off the power.
3. Remove the front lid and outside panel.
(Refer to section 1-6 in Part 1 of the Maintenance Manual.)
4. Remove the cassette compartment.
(Refer to section 3-3-24.)
n
A stop washer is used for installation of the T soft brake assembly. Do not reuse it. Install the new one
(3-559-408-11) when replacing the T soft brake assembly.
Tools
. Stop washer fastening tool
. Cleaning cloth
. Cleaning fluid
3-40
J-6323-530-A
3-184-527-01
9-919-573-01
DNV-5
DNW-7/90/90WS