6-10. SW Camera Ornamental Plate (3) Replacement
6-10. SW Camera Ornamental
Plate (3) Replacement
n
The SW camera ornamental plate (3) is attached
to the inside panel assembly with a both-sided
adhesive tape.
1. Insert a flat head (_) screwdriver tip between
the SW camera ornamental plate (3) and the
inside panel assembly. Peel the plate off
starting from its end gradually.
2. Clean the surface (the shaded portion
shown in illustration) from which the SW
camera ornamental plate (3) is peeled off.
3. Peel the protection sheet off the new SW
camera ornamental plate (3) and attach it to
the inside panel assembly.
6-20
Flat head (_)
screwdriver tip
Inside panel assembly
SW camera
ornamental plate (3)
Cleaning
HDW-750/750CE V1