Replacing The Camera Sw Ornamental Plate - Sony Digital Betacam DVW-707 Maintenance Manual

3-6. Replacing the Camera SW
Ornamental Plate
Removal
1. Open the inside panel.
2. Disconnect the harness from the connector
(CN503) on the TC-101 board.
3. Disconnect the three flexible card wires from
the connectors (CN121 to CN123) on the
TC-101 board.
4. Remove the hinges (F) and (R) from the unit,
and then remove the inside panel.
DVW-790WS/709WS/707
DVW-790WSP/709WSP/707P P2V1

3-6. Replacing the Camera SW Ornamental Plate

CN503
TC-101 board
Flexible card wires
Hinge (F)
CN121
Hinge (R)
TC-101 board
CN123
CN122
3-25