Menu Operation; Displaying The Menu; Displaying The Top Menu; Selecting A Menu Page From The Contents Screen - Sony BVP-E30 series Operation Manual

Menu Operation

To perform menu operations, first display the menu on the
viewfinder screen.

Displaying the Menu

Set the DISPLAY switch to MENU. The OPERATION or
USER menu, whichever was displayed when the camera
was turned off, will appear.
To display a desired menu page
1
Turn the MENU SELECT knob to move the arrow to
the figure on the top of the screen.
2
Push the MENU SELECT knob.
The arrow changes to the question mark.
3
Turn the MENU SELECT knob until the desired
menu page appears.
4
Push the MENU SELECT knob.
The question mark changes to the arrow, and the
selected page is displayed.
To make the menu disappear
Set the DISPLAY switch to OFF.

Displaying the TOP MENU

You can display the TOP MENU by one of the following
methods:
• While holding down the MENU SELECT knob, set the
DISPLAY switch from OFF to ON.
• While holding down the MENU SELECT knob, turn on
the camera.
• Select TOP at the right top on the menu.
< T O P M E N U >
cU S E R
U S E R M E N U C U S T O M I Z E
O P E R A T I O N
P A I N T
M A I N T E N A N C E
F I L E
D I A G N O S I S
22
Menu Operation
To make TOP MENU disappear
Turn off the camera, or while holding down the MENU
SELECT knob, set the DISPLAY switch from ON to OFF.
Selecting a Menu Page From the
CONTENTS Screen
When you display the CONTENTS screen (page 0) of each
menu, the pages of the menu are listed on the display.
Turn the MENU SELECT knob to move the arrow to the
desired page, and push the MENU SELECT knob.
The selected menu page is displayed.

Setting the Menu

Display the menu page on which you wish to make
settings, then follow the procedure below.
O F F
V T R A U T O
S T A R
W /B
T B A L
W H T
O N
S H U T
T E R
S E L
B L K
M IC
L E V E
L
MENU SELECT knob
1
Turn the MENU SELECT knob to move the arrow to
the item to be selected.
2
Push the MENU SELECT knob.
The arrow changes to a question mark.
3
Turn the MENU SELECT knob to select a setting
item or value.
4
Push the MENU SELECT knob.
The question mark changes to an arrow, and the
selected item or value is set.
Repeat steps 1 through 4 as required.
5
Set the DISPLAY switch to OFF when you are
finished making settings.
O N
O F F
U S
S T A T
U
M E N
L A Y
E L
D IS P
C A N C
U
M E N
L O C K
G E N
DISPLAY switch
STATUS/CANCEL switch