Top Menu; Bvp-E30/E30P M-V1 - Sony BVP-E30 Maintenance Manual

3-2. TOP Menu

The TOP menu shows all menu items.
You can display the TOP MENU by one of the following methods:
. While holding down the MENU SELECT knob, set the DISPLAY switch from OFF to MENU.
. While holding down the MENU SELECT knob, turn on the camera.
. Select TOP at the right top on the menu.
TOP MENU
<TOP MENU>
USER
USER MENU CUSTOMIZE
OPERATION
PAINT
MAINTENANCE
FILE
DIAGNOSIS
SERVICE
Menu
USER
USER MENU CUSTOMIZE
OPERATION
PAINT
MAINTENANCE
FILE
DIAGNOSIS
SERVICE

BVP-E30/E30P M-V1

Description
You can select desired pages and items from the OPERATION,
PAINT, MAINTENANCE, FILE and DIAGNOSIS menu pages and
copy and set them on the USER menu. (For details, refer to the
operation manual.)
Use this menu to edit menu pages to be set on the USER menu.
Use this menu to set camera settings for operation and to change
camera settings to suit shooting conditions during normal camera
operations.
Use this menu to make fine adjustments to the image while monitoring
the waveform of the camera output on a waveform monitor or other
output device.
Use this menu for the maintenance purposes or system changes. It
also contains the paint items less frequently used.
Use this menu for the file operation such as when storing the refer-
ence file etc.
Use this menu to check the circuit boards that are suspected to have
an error or to check the firmware versions.
Use this menu to adjust the circuit boards etc., or to update the
firmware for service purposes.
(Normally not displayed. To display, refer to Section 5-1-6.)
3-3 (E)