IMAGE TRANSFER ROLLER
1. Remove the Toner Cartridge and the Drum Cartridge.
2. Remove the IMAGE TRANSFER ROLLER with TRANSFER BRACKET using the precision screwdriver
as shown.
Image transfer roller
FIXING UNIT
1. Remove the toner cartridge and the drum cartridge.
2. Remove the REAR COVER.
3. Disconnect the connector P1302 and P1307 from the CONNECT PRINTER PCB, and CN1 from the
PSU. Also, remove the F.G. wire from the frame of PSU.
4. Remove two fixing unit mounting screws, and then remove the fixing unit.
Note: Be careful not to scratch the inside of the machine with the lower parts of the FIXING UNIT.
Fixing unit
5-41