Ppm Switching Board (Pwb-L); Fuser Frame Register Board (Pwb-R) - Muratec MFX-2500 Field Engineering Manual

5.2.63 PPM switching board (PWB-L)

1. Remove the Rear cover (lower). (See 5.2.48.)
2. Remove one screw and the PWB-L mounting bracket assembly.
3. Remove PWB-L.
PWB-L

5.2.64 Fuser frame register board (PWB-R)

1. Remove the Fuser unit. (See 5.1.5, page 5-14.)
2. Open the Exit Cover of the fusing unit.
3. Remove one screw and the Fusing Front Cover.
3. Snap off one E-ring and remove the Exit Cover.
5-74