2.4.17 FUSING COOLING FAN MOTOR
The Fusing Cooling Fan Motor located in the Right Door prevents the temperature of the Fusing Unit
Cover and the area above the I/C from rising inordinately. The motor also draws the paper after it has
been separated from the PC Drum onto the transport guide to ensure that it is stably and smoothly fed
into the Fusing Unit.
Electrical
Control Signal
Component
PJ13A-3A
M3
See block diagram of
the printer.
I/C (Drum Cartridge)
During Copy Cycle
Full speed
Pulse output
2-49
Fusing Unit
Fusing Cooling Fan
Motor (M3)
In Standby
During Warm-Up
Half speed
Stop
L