Cleaning The Fbs Glass, Contact Glass And White Pad; Cleaning The Led Print Head - Muratec MFX-1300 Field Engineering Manual

Cleaning the FBS glass, Contact glass and white pad

1. Open the platen cover.
2. Get a soft, lint-free cloth and moisten it with isopropyl alcohol.
Important: Make sure the cloth doesn't have any rough areas. Otherwise, it could scratch the glass
surface of the FBS.
3. Using the cloth, gently clean the FBS glass, contact glass and the white background area on the
underside of the platen cover.

Cleaning the LED print head

If you find your fax recipients complaining that the faxes you receive or copy image quality are streaked,
the LED print head may be dirty.
Important: Be careful not to put your hand between the top cover and the machine.
1. Turn off your fax machine.
2. Get a soft, lint-free cloth and moisten it with isopropyl alcohol.
3. Open the top cover and then open the printer cover.
Important: The fuser unit becomes very hot. Do not touch the fuser unit when you are cleaning the
LED print head.
4. Using the cloth, gently clean the LED print head.
Note: Do not use abrasive materials on the LED print head.
4-26