Display Spbm Multicast-Fdb - HP FlexFabric 5930 Series Command Reference Manual

Field
I-SID
Hostname
Cost
Port number

display spbm multicast-fdb

Use display spbm multicast-fdb to display SPBM multicast FDB entries.
Syntax
display spbm multicast-fdb [ b-vlan vlan-id | i-sid i-sid | system-id system-id ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
b-vlan vlan-id: Specifies a B-VLAN by its VLAN ID in the range of 1 to 4094. If you do not specify a
B-VLAN, the command displays multicast FDB entries for all B-VLANs.
i-sid i-sid: Specifies an I-SID in the range of 255 to 16777215. If you do not specify an I-SID, the
command displays multicast FDB entries for all I-SIDs.
system-id system-id: Specifies a system ID in XXXX.XXXX.XXXX format. If you do not specify a system ID,
the command displays multicast FDB entries for all system IDs.
Usage guidelines
The SPBM multicast FDB contains multicast routes that ISIS-SPB calculates based on the SPBM LSDB.
If you do not specify any parameters, the command displays all multicast FDB entries.
Examples
# Display all SPBM multicast FDB entries.
<Sysname> display spbm multicast-fdb
Flags: E-Egress T-Transit
System ID
Description
I-SID and the multicast group membership flags of the LSP originating device for the
I-SID.
The following are the flags:
•
T—T bit set. The LSP originating device is a transmitter in the multicast group for
the I-SID.
•
R—R bit set. The LSP originating device is a receiver in the multicast group for
the I-SID.
This field displays (T&R) next to the I-SID if the originating device is both a receiver
and a transmitter in the multicast group for the I-SID.
Symbolic hostname configured with the is-name command. If the LSP originating
device is not assigned a hostname, this field displays its system ID.
Link metric value.
Number of ports that have adjacencies.
MAC address B-VLAN Flags Port
30