Display Openflow Flow-Table - HP 5900 series Command Reference Manual

Examples
# Display controller information for OpenFlow instance 10.
<Sysname> display openflow instance 10 controller
Instance 10 controller information:
Reconnect interval: 60 (s)
Echo interval
Controller ID
Controller IP address
Controller port
Controller role
Connect type
Connect state
Packets sent
Packets received
SSL policy
VRF name
Table 1 Command output
Field
Reconnect interval
Echo interval
Controller role
Connect type
Connect state
Packets sent
Packets received
SSL policy
VRF name

display openflow flow-table

Use display openflow flow-table to display flow table information for an OpenFlow instance.
: 5 (s)
: 1
: 192.168.49.49
: 6633
: --
: TCP
: Idle
: 0
: 0
: --
: --
Description
Reconnection interval (in seconds) for an OpenFlow instance to re-connect to all
controllers.
Interval (in seconds) at which an OpenFlow instance sends an Echo Request
message to all controller.
Role of the controller:
•
Equal—The controller has the same mode as other controllers that are
specified for the OpenFlow instance.
•
Master—The controller is the master controller for the OpenFlow instance.
•
Slave—The controller is a subordinate controller for the OpenFlow instance.
If the controller is not configured with any role, this field displays two hyphens
(--).
Type of the connection between the OpenFlow instance and the controller: TCP
or SSL.
State of the connection between the OpenFlow instance and the controller: Idle
or Established.
Number of packets that have been sent to the controller.
Number of packets that have been received from the controller.
Name of the SSL client policy used for SSL connections.
If no SSL policy is configured, this field displays two hyphens (--).
Name of the MPLS L3VPN to which the controller belongs.
If no VRF is configured, this field displays two hyphens (--).
7