Dhcpv6-Snooping Max-Bindings - HP Aruba JL253A Management And Configuration Manual

For arubaos-switch 16.08

Table of Contents

that the attempt to transfer the DHCPv6 lease file retries indefinitely. The default timeout value is 300

Configure the parameters to copy the DHCPv6 Snooping lease file to a TFTP server.

Configure the number of seconds to wait before copying the DSNOOPv6 lease file to a TFTP server.

Copy the DHCPv6 Snooping lease file to a TFTP server.

Configure the number of seconds to wait for the DSNOOPv6 lease file transfer to complete.

Validation rules

Verify whether file name entered is in URL format

Verify whether the timeout value is within the limit

Verify whether the delay value is within the limit.

If the URL format is not proper

If the entered URL does not have a valid transfer

dhcpv6–snooping max-bindings

[no] dhcpv6-snooping max-bindings <PORT-LIST 1-8192>

Configure the maximum number of binding addresses allowed per binding anchor. A binding anchor is a unique

attribute that can be associated with a client address.

Parameters and options

max-bindings

Configuring maximum number of binding addresses allowed per port.

If the max-bindings value is configured before enabling dhcpv6-snooping the limit is immediately

applied and the bindings are not allowed to exceed the max-bindings value.

The max-bindings value is setafter enabling dhcpv6-snooping.

The current bindings are greater than the max-binding value, the configuration will be applied as and when

clients release their IPv6 addresses.

Current bindings are lesser than that of the value entered, the configuration will be immediately applied.

<PORT-LIST 1-8192>

Specify the ports on which max-bindings need to be applied in the range of 1–8192.

Error/Warning/Prompt

database: Bad URL format.

Invalid input: <value>

Bad URL format.

URL Transport mode is not supported.

Aruba 2930F / 2930M Management and Configuration Guide

for ArubaOS-Switch 16.08

Troubleshooting