Timer Response-Timeout (Radius Scheme View); User-Name-Format (Radius Scheme View) - HP 5120 SI series Command Reference Manual

Related commands: retry realtime-accounting and radius scheme.
Examples
# Set the real-time accounting interval to 51 minutes for RADIUS scheme radius1.
<Sysname> system-view
[Sysname] radius scheme radius1
[Sysname-radius-radius1] timer realtime-accounting 51

timer response-timeout (RADIUS scheme view)

Syntax
timer response-timeout seconds
undo timer response-timeout
View
RADIUS scheme view
Default level
2: System level
Parameters
seconds: RADIUS server response timeout period in seconds, in the range 1 to 10.
Description
Use the timer response-timeout command to set the RADIUS server response timeout timer.
Use the undo timer command to restore the default.
By default, the RADIUS server response timeout period is 3 seconds.
If a NAS receives no response from the RADIUS server in a period of time after sending a RADIUS request
(authentication/authorization or accounting request), it has to resend the request so that the user has
more opportunity to obtain the RADIUS service. The NAS uses the RADIUS server response timeout timer
to control the transmission interval.
A proper value for the RADIUS server response timeout timer can help improve the system performance.
Set the timer based on the network conditions.
The maximum number of RADIUS packet transmission attempts multiplied by the RADIUS server response
timeout period cannot be greater than 75.
Related commands: radius scheme and retry.
Examples
# Set the RADIUS server response timeout timer to 5 seconds for RADIUS scheme radius1.
<Sysname> system-view
[Sysname] radius scheme radius1
[Sysname-radius-radius1] timer response-timeout 5

user-name-format (RADIUS scheme view)

Syntax
user-name-format { keep-original | with-domain | without-domain }
69