Savi Configuration Commands; Ipv6 Savi Dad-Delay; Ipv6 Savi Dad-Preparedelay - HP 5120 SI series Command Reference Manual

SAVI configuration commands

ipv6 savi dad-delay

Syntax
ipv6 savi dad-delay value
undo ipv6 savi dad-delay
View
System view
Default level
2: System level
Parameters
value: Specifies the time in centiseconds to wait for a duplicate address detection (DAD) NA, ranging
from 0 to 2147483647.
Description
Use the ipv6 savi dad-delay command to set the time to wait for a DAD NA.
Use the undo ipv6 savi dad-delay command to restore the default.
By default, the time to wait for a DAD NA is 100 centiseconds (1 second).
Examples
# Set the time to wait for a DAD NA to 100 seconds.[
<Sysname> system-view
[Sysname] ipv6 savi dad-delay 10000

ipv6 savi dad-preparedelay

Syntax
ipv6 savi dad-preparedelay value
undo ipv6 savi dad-preparedelay
View
System view
Default level
2: System level
Parameters
value: Specifies the time in centiseconds to wait for a DAD NS from a DHCPv6 client after the DHCPv6
client obtains an IP address. This argument ranges from 0 to 2147483647.
310