Hello-Option Holdtime (Ipv6 Pim View); Hello-Option Lan-Delay (Ipv6 Pim View) - HP 6125XLG Command Reference Manual

Related commands
ipv6 pim hello-option dr-priority

hello-option holdtime (IPv6 PIM view)

Use hello-option holdtime to set the global IPv6 PIM neighbor lifetime.
Use undo hello-option holdtime to restore the default.
Syntax
hello-option holdtime time
undo hello-option holdtime
Default
The global IPv6 PIM neighbor lifetime is 105 seconds.
Views
IPv6 PIM view
Predefined user roles
network-admin
Parameters
time: Sets the IPv6 PIM neighbor lifetime (in seconds), in the range of 1 to 65535. A value of 65535
means that the IPv6 PIM neighbors are always reachable.
Usage guidelines
You can set the IPv6 PIM neighbor lifetime in IPv6 PIM view or interface view. The configurations made
in IPv6 PIM view are effective on all interfaces, and the configurations made in interface view are
effective on only the current interface. If you set the IPv6 PIM neighbor lifetime in both IPv6 PIM view and
interface view, the configuration in interface view always takes precedence.
Examples
# Set the global IPv6 PIM neighbor lifetime to 120 seconds.
<Sysname> system-view
[Sysname] ipv6 pim
[Sysname-pim6] hello-option holdtime 120
Related commands
ipv6 pim hello-option holdtime

hello-option lan-delay (IPv6 PIM view)

Use hello-option lan-delay to set the global prune delay (the delay for forwarding a received prune
message).
Use undo hello-option lan-delay to restore the default.
Syntax
hello-option lan-delay delay
undo hello-option lan-delay
161