Ipv6 Pim Commands; Bsm-Fragment Enable (Ipv6 Pim View); Bsr-Policy (Ipv6 Pim View) - HP 6125XLG Command Reference Manual

IPv6 PIM commands

bsm-fragment enable (IPv6 PIM view)

Use bsm-fragment enable to enable bootstrap message (BSM) semantic fragmentation.
Use undo bsm-fragment enable to disable BSM semantic fragmentation.
Syntax
bsm-fragment enable
undo bsm-fragment enable
Default
BSM semantic fragmentation is enabled.
Views
IPv6 PIM view
Predefined user roles
network-admin
Usage guidelines
Disable the BSM semantic fragmentation function if any device that does not support this function exists
in the IPv6 PIM-SM domain.
Examples
# Disable BSM semantic fragmentation.
<Sysname> system-view
[Sysname] ipv6 pim
[Sysname-pim6] undo bsm-fragment enable

bsr-policy (IPv6 PIM view)

Use bsr-policy to configure the legal bootstrap router (BSR) address range to guard against BSR
spoofing.
Use undo bsr-policy to remove the configuration.
Syntax
bsr-policy acl6-number
undo bsr-policy
Default
BSR address range is not defined, and bootstrap messages from any IPv6 multicast sources are regarded
as valid.
Views
IPv6 PIM view
144