Tnl-Policy (Vpn Instance View/Ipv4 Vpn View/Ipv6 Vpn View) - HP FlexFabric 12500 Command Reference Manual

Default
SNMP notifications for MPLS L3VPN are enabled.
Views
System view
Predefined user roles
network-admin
mdc-admin
Usage guidelines
This feature enables MPLS L3VPN to generate SNMP notifications. The generated SNMP notifications
are sent to the SNMP module.
For more information about SNMP notifications, see Network Management and Monitoring
Configuration Guide.
Examples
# Enable SNMP notifications for MPLS L3VPN.
<Sysname> system-view
[Sysname] snmp-agent trap enable l3vpn

tnl-policy (VPN instance view/IPv4 VPN view/IPv6 VPN view)

Use tnl-policy to associate a VPN instance with a tunnel policy.
Use undo tnl-policy to remove the association.
Syntax
tnl-policy tunnel-policy-name
undo tnl-policy
Default
No tunnel policy is associated with a VPN instance.
Views
VPN instance view, IPv4 VPN view
Predefined user roles
network-admin
mdc-admin
Parameters
tunnel-policy-name: Specifies a tunnel policy by its name, a case-insensitive string of 1 to 19 characters.
Usage guidelines
The VPN instance uses the specified tunnel policy to select tunnels for traffic.
If a VPN instance is not associated with any tunnel policy or the associated tunnel policy is not configured,
the VPN instance selects tunnels according to the default tunnel policy. The default tunnel policy selects
only one tunnel in this order: LSP tunnel, GRE tunnel, CRLSP tunnel.
A tunnel policy specified in VPN instance view is applicable to both the IPv4 VPN and the IPv6 VPN.
96