Display Ipv6 Neighbors Count - HP A5120 EI Series Command Reference Manual

Field
State
T
Age

display ipv6 neighbors count

Syntax
display ipv6 neighbors { { all | dynamic | static } [ slot slot-number ] | interface interface-type interface-
number | vlan vlan-id } count [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
all: Displays the total number of all neighbor entries, including neighbor entries acquired dynamically
and configured statically.
dynamic: Displays the total number of all neighbor entries acquired dynamically.
static: Displays the total number of neighbor entries configured statically.
slot slot-number: Displays the total number of neighbor entries of a specified device in an IRF. If no IRF is
formed, the total number of neighbor entries of only the current device is displayed. The slot-number
argument indicates the member ID of the device.
If the switch does not support IRF, the slot-number argument must be 1.
interface interface-type interface-number: Displays the total number of neighbor entries of a specified
interface.
vlan vlan-id: Displays the total number of neighbor entries of a specified VLAN whose ID ranges from 1
to 4094.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
Description
State of a neighbor:

INCMP: The address is being resolved. The link layer address of the neighbor is
unknown.

REACH: The neighbor is reachable.

STALE: The reachability of the neighbor is unknown. The switch will not verify
the reachability any longer unless data is sent to the neighbor.

DELAY: The reachability of the neighbor is unknown. The switch sends an NS
message after a delay.

PROBE: The reachability of the neighbor is unknown. The switch sends an NS
message to verify the reachability of the neighbor.
Type of neighbor information, including static configuration (represented by S) and
dynamic acquisition (represented by D).
For a static entry, a hyphen (-) is displayed. For a dynamic entry, the reachable
time (in seconds) elapsed is displayed, and if it is never reachable, a number sign
(#) is displayed (for a neighbor acquired dynamically).
144