Dell PowerConnect W-7200 Series Reference Manual page 559

Arubaos 6.2
Hide thumbs Also See for PowerConnect W-7200 Series:
Table of Contents

Advertisement

Parameter
Show FQDN
Authentication Protocol
Login page
Welcome page
Add controller IP address in the
redirection URL
Adding user vlan in redirection URL
Add a controller interface in the
redirection URL
Allow only one active user session
White List
Black List
Show the acceptable use policy page
Related Commands
Command
aaa authentication captive-
portal
Command History
This command was introduced in ArubaOS 3.0.
Version
ArubaOS 3.0
ArubaOS 6.1
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Description
If enabled, the user can see and select the fully-qualified domain
name (FQDN) on the captive portal login page.
This parameter specifies the type of authentication required by this
profile, PAP is the default authentication type
URL of the page that appears for the user logon.
URL of the page that appears after logon and before the user is
redirected to the web URL.
If enabled, this option sends he controller's IP address in the
redirection URL when external captive portal servers are used. An
external captive portal server can determine the controller from
which a request originated by parsing the 'switchip' variable in the
URL.
Shows the user's VLAN ID sent in the redirection URL, if enabled
Shows the IP address of a controller interface added to the
redirection URL, if enabled.
If enabled, only one active user session is allowed at any time. This
feature is disabled by default.
Shows the configured white list on an IPv4 or IPv6 network
destination. The white list contains authenticated websites that a
guest can access.
Shows the configured black list on an IPv4 or IPv6 network
destination. The black list contains websites (unauthenticated) that a
guest cannot access.
If enabled, the captive portal page will show the acceptable use
policy page before the user logon page. This feature is disabled by
default.
Description
aaa authentication captive-portal
Use
parameters displayed in the output of this show
command.
Description
Command introduced
The sygate-on-demand parameter was deprecated, and the white-list and black-list
Mode
to configure the
Config mode
show aaa authentication captive-portal | 559

Advertisement

Table of Contents
loading

This manual is also suitable for:

Powerconnect w-series

Table of Contents