Dell PowerConnect W-7200 Series Reference Manual page 273

guest-access-email
guest-access-email
smtp-port
smtp-server
no...
Description
This command configures the SMTP server which is used to send guest email. Guest email is generated when a guest
user account is created or when the Guest Provisioning user sends guest user account email a later time.
Syntax
Parameter
smtp-port
<Port number>
smtp-server
<IP-Address>
no
Usage Guidelines
As part of the guest provisioning feature, the guest-access-email command allows you to set up the SMTP port and
server that process guest provisioning email. This email process sends email to either the guest or the sponsor
whenever a guest user account is created or when the Guest Provisioning user manually sends email from the Guest
Provisioning page.
Example
The following command creates a guest-access email profile and sends guest user email through SMTP server IP
address 1.1.1.1 on port 25.
(host) (config) #guest-access-email
(host) (Guest-access Email Profile) #
(host) (Guest-access Email Profile) #smtp-port 25
(host) (Guest-access Email Profile) #smtp-server 1.1.1.1
Related Commands
(host) #show guest-access-email
(host) #local-userdb-guest add
(host) #local-userdb-guest modify
(host) #show local-userdb-guest
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Description
Identifies the SMTP port through which the guest-access
email is sent.
The SMTP port number.
The SMTP server to which the controller sends the guest-
access email.
The SMTP server's IP address.
Deletes the command configuration
Range Default
— —
1–65535 25
— —
— —
— —
guest-access-email | 273