Dell PowerConnect W-7200 Series Reference Manual page 201

copy
copy
flash: <srcfilename> {flash: <destfilename> | scp: <scphost> <username> <destfilename> tftp:
<tftphost> <destfilename> | usb: partition {0|1} <destfilename>}
ftp: <ftphost> <user> <filename> system: partition {0|1} |
running-config {flash: <filename> | ftp: <ftphost> <user> <password> <filename>
[<remote-dir>] | startup-config | tftp: <tftphost> <filename>} |
scp: <scphost> <username> <filename> {flash: <destfilename>| system: partition [0|1]}|
startup-config {flash: <filename> | tftp: <tftphost> <filename>} |
system: partition {<srcpartition> 0|1} [<destpartition> 0 | 1] |
tftp: <tftphost> <filename> {flash: <destfilename> | system: partition [0|1]}
usb: partition <partition-number> <filename> flash:
Description
This command copies files to and from the controller.
Syntax
Parameter
flash:
srcfilename
flash:
destfilename
tftp:
tftphost
usb:
partition
ftp:
ftphost
user
filename
0 | 1
running-config
flash:
filename
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Description
Copy the contents of the controller's flash file system, the system image, to a specified
destination.
Full name of the flash file to be copied.
Copy the file to the flash file system.
Specify the new name of the copied file.
Copy the file to a TFTP server.
Specify the IP address or hostname of the TFTP server.
Copy the file to an attached USB storage device.
Specify the partition on the USB device.
Copy a file from the FTP server.
Specify the IP address or hostname of the FTP server.
User account name required to access the FTP server.
Full name of the file to be copied.
Specify the system partition to save the file.
Copy the active, running configuration to a specified destination.
Copy the configuration to the flash file system.
Specify the new name of the copied configuration file.
<destfilename>
copy | 201