ip name-server
ip name-server <ipaddr>
Description
This command configures servers for name and address resolution.
Syntax
Parameter
<ip-addr>
Usage Guidelines
You can configure up to six servers using separate commands. Specify one or more servers when you configure a
default domain name (see
Example
The following command configures a name server:
ip name-server 10.1.1.245
Command History
This command was available in ArubaOS 3.0.
Command Information
Platform
Available on all platforms
378 | ip name-server
Description
IP address of the server.
"ip domain-name" on page
License
Available in the base operating system.
363).
Command Mode
Config mode on master controllers
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide