Dell PowerConnect W-7200 Series Reference Manual page 133

ap mesh-radio-profile
ap mesh-radio-profile <profile>
a-tx rates [6|9|12|18|24|36|48|54]
allowed-vlans <vlan-list>
children <children>
clone <profile>eapol-rate-opt
g-tx rates [1|2|5|6|9|11|12|18|24|36|48|54]
heartbeat-threshold <count>
hop-count <hop-count>
link-threshold <count>
max-retries <max-retries>
mesh-ht-ssid-profile
mesh-mcast-opt
mesh-survivability
metric-algorithm {best-link-rssi|distributed-tree-rssi}
mpv <vlan-id>
no ...
reselection-mode {reselect-anytime|reselect-never|startup-subthreshold|
subthreshold-only}
rts-threshold <rts-threshold>
Description
This command configures a mesh radio profile used by mesh nodes.
Syntax
Parameter
<profile>
allowed-vlans
<vlan-list>
a-tx rates
children
clone
eapol-rate-opt
g-tx rates
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Description
Name of this instance of the profile. The name must
be 1-63 characters.
Specify a list of VLAN IDs that can be used by a mesh
link on APs associated with this mesh radio profile
A comma-separated list of VLAN IDs. You can also
specify a range of VLAN IDs using a dash (for
example, 1–4095)
Indicates the transmit rates for the 802.11a radio.
The AP attempts to use the highest transmission rate
to establish a mesh link. If a rate is unavailable, the
AP goes through the list and uses the next highest
rate.
Indicates the maximum number of children a mesh
node can accept.
Name of an existing mesh radio profile from which
parameter values are copied.
Issue this command to choose a more conservative
rate for EAPOL frames and mesh echoes.
Indicates the transmit rates for the 802.11b/g radio.
Range Default
— "default"
6, 9, 12, 18, 24, 6, 9, 12, 18, 24,
36, 48, 54 Mbps 36, 48, 54 Mbps
1-64 64
enabled disabled
disabled
1, 2, 5, 6, 9, 11, 1, 2, 5, 6, 9, 11,
ap mesh-radio-profile | 133