Dell PowerConnect W-7200 Series Reference Manual page 149

ap remove-r1-key
ap remove-r1-key <sta-mac>
[ap-name <ap-name> | bssid <bssid> | ip-addr <ip-addr>]
Description
This command removes the r1 key from an AP.
Syntax
Parameter
<sta-mac>
ap-name <ap-name>
bssid <bssid>
ip-addr <ip-addr>
Usage Guidelines
Use this command to remove an r1 key from an AP when the AP does not have a cached r1 key during Fast BSS
Transition roaming.
Examples
The following command configures the regulatory domain profile for APs in Japan:
(host) #ap remove_r1_key 00:50:43:21:01:b8 ap-name MAcage-105-GL
Execute the following command to check if the r1 key is removed from the AP:
(host) #show ap remote debug r1_key ap-name MAcage-105-GL
Stored R1 Keys
--------------
Station MAC
-----------
Related Commands
To check if the r1 key is removed from an AP, use the
Command History
Introduced in ArubaOS 6.2.
Command Information
Platforms
All platforms
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Description
MAC address of the client.
Name of the AP.
BSSID of the AP.
IP address of the AP.
Mobility Domain ID Validity Duration
------------------ -----------------
Licensing
Base operating system
R1 Key
------
show ap remote debug r1_key
Command Mode
Enable mode on master controllers
command:
ap remove-r1-key | 149