Dell PowerConnect W-7200 Series Reference Manual page 902

show ap wired-port-profile
show ap wired-port-profile
Description
Shows all AP wired port profiles and their status.
Syntax
No parameters.
Example
The example below shows that the controller has three wired port profiles. The References column lists the number
of other profiles with references to the wired port profile, and the Profile Status column indicates whether the profile
is predefined. User-defined profiles will not have an entry in the Profile Status column.
(host) (config) #show ap
AP wired port profile List
--------------------------
Name
----
default
NoAuthWiredPort
shutdown
Total:3
The following command displays information for an individual wired port profile:
(host)#show ap wired-port-profile default
AP wired port profile "default"
-------------------------------
Parameter
---------
Wired AP profile
Ethernet interface link profile
AP LLDP profile
Shut down?
Remote-AP Backup
AAA Profile
Time to wait for authentication to succeed
The output of this command includes the following information:
Parameter
Wired AP profile
Ethernet interface link profile
902 | show ap wired-port-profile
wired-port-profile
References Profile Status
---------- --------------
3
4 Predefined (editable)
3 Predefined
Value
-----
default
default
default
No
Enabled
N/A
20 sec
Description
Name of a wired AP profile to be used by devices connecting the AP's wired
port. The wired AP profile defines the forwarding mode and switchport
values used by the port.
An Ethernet Link profile to be used by devices connecting to the AP's wired
port profile. This profile defines the duplex value and speed to be used by the
port.
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide