Dell PowerConnect W-7200 Series Reference Manual page 393

lcd-menu
lcd-menu
[no] disable menu [maintenance [factory-default| media-eject| qui-quick-setup | media-
eject | system-halt | system-reboot | upgrade-image [parition0 | partition1]| upload-
config]]
Description
This command allows you to enable or disable the LCD menu either completely or for specific operations.
Syntax
Parameter
lcd-menu
no
disable
maintenance
factory-default
media-eject
system-halt
system-reboot
upgrade-image
partition 0
partition 1
upload-config
Usage Guidelines
You can use this command to disable executing the maintenance operations using the LCD menu. You can use the
no form of these commands to enable the specific LCD menu. For example, the following commands enable system
halt and system reboot options:
(host) (config) #lcd-menu
(host) (lcd-menu) #no disable menu maintenance system-halt
(host) (lcd-menu) #no disable menu maintenance system-reboot
You can use the following show command to display the current LCD settings:
(host)#show lcd-menu
lcd-menu
--------
Menu
----
menu maintenance upgrade-image partition0
menu maintenance upgrade-image partition1
menu maintenance system-reboot reboot-stack
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Description
Enters the LCD menu configuration mode.
Delete the specified LCD menu option.
Disables (or enables) the complete LCD menu.
Disables (or enables) the maintenance LCD menu.
Disables (or enables) the return to factory default option in the LCD menu.
Disables (or enables) the media eject option in the LCD menu.
Disables (or enables) the system halt option in the LCD menu.
Disables (or enables) the system reboot in the LCD menu.
Disables (or enables) the upgrade image option in the LCD menu.
Disables (or enables) image upgrade on the specified partition (0 or 1).
Disables (or enables) the upload config option in the LCD menu.
Value
-----
enabled
enabled
enabled
Default
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
lcd-menu | 393