Dell PowerConnect W-7200 Series Reference Manual page 781

show ap mesh active
show ap mesh active [<mesh-cluster>|{page <page>}|{start <start>}]
Description
Show active mesh cluster APs currently registered on this controller.
Syntax
Parameter
<mesh-cluster>
page <page>
start <start>
Examples
The output of this command displays a list of all active mesh points and mesh portals.
(host) #show ap mesh active
Mesh Cluster Name: meshprofile1
------------------------------
Name Group
Mesh Role
---- -----
---------
mp1 mp1
Point
mp2 mp2
mp3 mp3
Point
mpp mpp125
Portal
Parent #Children
------ ---------
mp3 0
mpp 1
mp2 1
- 1
The output of this command includes the following information:
Column
Name
Group
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Description
Name of a mesh cluster profile.
Limit the output of this command to a specific number of entries by entering the number of
entries you want to display.
Start displaying the index of mesh APs at a chosen index number by entering the index
number of the AP at which command output should start.
IP Address BSSID
---------- -----
10.3.148.245 00:1a:1e:85:c0:30
10.3.148.250 00:1a:1e:88:11:f0
10.3.148.253 00:1a:1e:88:01:f0
10.3.148.252 00:1a:1e:88:05:50
AP Type Uptime
------- ------
125 13d:2h:25m:19s
125 14d:21h:23m:49s
125 14d:21h:14m:55s
125 14d:19h:5m:3s
Description
Name of an AP.
AP group which includes the specified AP.
Band/Ch/EIRP/MaxEIRP
--------------------
802.11a/157/19/36
802.11a/157/19/36
Bridge/Bridge Point
802.11a/157/19/36
802.11a/157/19/36
MTU Enet 0/1
--- --------
Off/Off
Bridge/Bridge
1578 -/Bridge
show ap mesh active | 781