Dell PowerConnect W-7200 Series Reference Manual page 159

Parameter
rf-band
rtls-server
ip-addr
port
key
station-message-
frequency
session-acl
syscontact
telnet
Usage Guidelines
The AP system profile configures AP administrative operations, such as logging levels.
Example
The following command sets the LMS IP address in an AP system profile:
(host) (config) #ap system-profile local1
lms-ip 10.1.1.240
Command History
Release
ArubaOS 3.0
ArubaOS 3.2
ArubaOS 3.3.2
ArubaOS 5.0
ArubaOS 6.0
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Description
For APs that support both a and b/g RF bands, RF band
in which the AP should operate:
g = 2.4 GHz
l
a = 5 GHz
l
Enables the AP to send RFID tag information to an RTLS
server.
IP address of the server to which location reports are
sent.
Port number on the server to which location reports are
sent.
Shared secret key.
Indicates how often packets are sent to the server.
Session ACL configured with the ip access-list session
command.
NOTE: This parameter requires the PEFNG license.
SNMP system contact information.
Enable or disable telnet to the AP.
Modification
Command introduced
Support for additional RTLS servers and remote AP enhancements was introduced.
Maintenance-mode parameter was introduced.
l
Multiple remote AP DHCP server enhancements were introduced.
l
Support for RFprotect server and backup server configuration was introduced.
l
The mms-rtls-server parameter was deprecated in ArubaOS 3.3.2.
l
The master-ip, rfprotect-server-ip and rfprotect-bkup-server parameters were deprecated.
Added support for the option to set the RF scanning band (am-scan-rf-band).
The keepalive-interval parameter was deprecated.
Range Default
a/g g
— —
— —
— —
— —
5-3600 30 seconds
— —
— —
— disabled
ap system-profile | 159