Logging Level - Dell PowerConnect W-7200 Series Reference Manual

logging level

logging level <level> <category> [process <process>] [subcat <subcategory>]
Description
Use this command to set the categories or subcategories and the severity levels of messages that are logged.
Syntax
Parameter
<level>
emergencies
alerts
critical
errors
warnings
notifications
informational
debugging
<category>
ap-debug
network
security
system
user
user-debug
wireless
process
aaa
ads
approc
authmgr
428 | logging level
Description
The message severity level, which can be one of the following (in order of severity level):
(0) Panic conditions that occur when the system becomes unstable.
(1) Any condition requiring immediate attention and correction.
(2) Any critical conditions, such as hard drive errors.
(3) Error conditions.
(4) Warning messages.
(5) Significant events of a non-critical and normal nature.
(6) Messages of general interest to system users.
(7) Messages containing information for debugging purposes.
Message category, which can be one of the following:
AP troubleshooting messages. You must specify a debug value.
Network messages.
Security messages.
System messages.
User messages.
User troubleshooting messages. You must specify a MAC address.
Wireless messages.
Controller process, which can be one of the following:
AAA logging
Anomaly detection
AP processes
User authentication
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide