Dell PowerConnect W-7200 Series Reference Manual page 86

aaa tacacs-accounting
aaa tacacs-accounting server-group <group>
command {action|all|configuration|show}
mode {enable|disable}
Description
This command configures reporting of commands issued on the controller to a TACACS+ server group.
Syntax
Parameter
server-group <group>
command
action
all
configuration
show
mode
Usage Guidelines
You must have previously configured the TACACS+ server and server group (see
on page 35 and "aaa server-group" on page
Example
The following command enables accounting and reporting of configuration commands to the server-group "tacacs1":
aaa tacacs-accounting server-group tacacs1 mode enable command configuration
Command History
This command was available in ArubaOS 3.0.
Command Information
Platforms
All platforms
86 | aaa tacacs-accounting
Description
The TACACS server group to which the reporting is sent.
The types of commands that are reported to the TACACS
server group.
Reports action commands only.
Reports all commands.
Reports configuration commands only
Reports show commands only
Enables accounting for the server group.
82).
Licensing
Base operating system
Range
—
—
—
—
—
—
enable/
disable
"aaa authentication-server tacacs"
Command Mode
Config mode on master controllers
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Default
—
—
—
—
—
—
disabled