Dell PowerConnect W-7200 Series Reference Manual page 161

ap wipe out flash
ap wipe out flash
ap-name <ap-name>
ip-addr <ip-addr>
Description
Overwrite the entire AP compact flash, destroying its contents (including the current image file).
Syntax
Parameter
ap-name
ip-addr
Usage Guidelines
Use this command only under the supervision of Dell technical support. If you delete the current image in the AP's
flash memory, the AP will not function until you reload another image.
Command History
This command was introduced in
Command Information
Platforms
All platforms running ArubaOS
3.3.2.x-FIPS or later.
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Description
Wipe out the flash of the AP with the specified name.
Wipe out the flash of the AP with the specified IP
address.
3.3.2.
ArubaOS
Licensing
Base operating system
Range
—
—
Command Mode
Config mode on master controllers
Default
—
—
ap wipe out flash | 161