Dell PowerConnect W-7200 Series Reference Manual page 755

show ap debug trace-addr
show ap debug trace-addr
Description
Show MAC addresses in the trace buffer.
Usage Guidelines
Use this command to troubleshoot wireless clients that are being traced for 802.11 communication
Examples
The output of the command shows the Trace List table. If no wireless clients are being traced, this table will be
empty.
(host) #show ap debug trace-addr
Trace List
----------
MAC Address
-----------
00:1a:1e:c5:ca:b4
00:1a:1e:c5:d6:46
00:1a:1e:c5:d7:40
00:1a:1e:c5:d7:64
00:1a:1e:c5:d9:56
00:1a:1e:c5:d9:b0
Command History
Introduced in ArubaOS 3.0.
Command Information
Platforms
All platforms
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Licensing
Base operating system
Command Mode
Enable or Config mode on master controllers
show ap debug trace-addr | 755