Dell PowerConnect W-7200 Series Reference Manual page 615

Arubaos 6.2
Hide thumbs Also See for PowerConnect W-7200 Series:
Table of Contents

Advertisement

Parameter
8021.X Authentication Server Group
L2 Authentication Fail Through
RADIUS Accounting Server Group
RADIUS Interim Accounting
XML API server
RFC 3576 server
User derivation rules
Wired to Wireless Roaming
SIP authentication role
device type classification
enforce DHCP
Related Commands
Command
aaa profile
Command History
This command was introduced in ArubaOS 3.0.
Command Information
Platforms
All platforms
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Description
Name of the server group used for 802.1X authentication.
To select the other authentication method if one fails.
Name of the server group used for RADIUS authentication.
By default, the RADIUS accounting feature sends only start and stop
messages to the RADIUS accounting server. If RADIUS Interim
Accounting is enabled, the controller to can also end Interim-Update
messages with current user statistics to the server at regular
intervals.
IP address of a configured XML API server.
IP address of a RADIUS server hat can send user disconnect and
change-of-authorization messages, as described in RFC 3576.
Shows whether Wired to Wireless Roaming is Enabled or Disabled.
For controllers with an installed PEFNG license, this parameter
displays the configured role assigned to a session initiation protocol
(SIP) client upon registration.
Shows if the device identification feature is enabled or disabled.
When devtype-classification parameter is enabled, the output of the
show user and show user-table commands shows each client's
device type, if that client device can be identified.
When this option is enabled, clients must complete a DHCP
exchange to obtain an IP address. Best practices are to enable this
option when you use the aaa derivation-rules command to create a
rule with the DHCP-Option rule type. This parameter is disabled by
default.
Description
Use the command
aaa profile
Licensing
Base operating system
to define AAA profiles.
Command Mode
Enable or Config mode on master or local
controllers
Mode
Config mode
show aaa profile | 615

Advertisement

Table of Contents
loading

This manual is also suitable for:

Powerconnect w-series

Table of Contents