Dell PowerConnect W-7200 Series Reference Manual page 837

The output of this command includes the following information:
Column
Country Code
Valid 802.11g
channel
Valid 802.11a
channel
Valid 802.11g 40MHz
channel pair
Valid 802.11a 40MHz
channel pair
Command History
Introduced in ArubaOS 3.0.
Command Information
Platforms
All platforms
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Description
Code that represents the country in which the APs will operate. The country code
determines the 802.11 wireless transmission spectrum.
Selected 802.11b/g channel available for use by an AP using the specified regulatory
domain profile. These channels are limited to those valid for the profile's country code.
Selected 802.11a channel available for use by an AP using the specified regulatory domain
profile. These channels are limited to those valid for the country code.
Selected 802.11b/g 40 MHz channel pair available for use by an AP using the specified
domain profile. These channels are limited to those valid for the profile's country code.
Selected 802.11a 40 MHz channel pair available for use by an AP using the specified
domain profile. These channels are limited to those valid for the profile's country code.
Licensing
Base operating system
Command Mode
Enable or Config mode on master controllers
show ap regulatory-domain-profile | 837