Dell PowerConnect W-7200 Series Reference Manual page 712

show ap database-summary
show ap database-summary
Description
Show a general summary of access point information for this controller.
Usage Guidelines
Use this command to show the current number of active APs and Air Monitors. This command is also useful for
determining how many unprovisioned APs or duplicate APs are on the network. For full details on each AP registered
to a controller, use the command show ap database.
Examples
The output of this command shows that this controller can detect a total of five APs, four up, and one down.
AP Database Summary
-------------------
AP Mode
Down RAP Upgrading*
-------
-- --------------
Access Points
0
Air Monitors
0
Wired Access Points
0
Mesh Portals
0
Mesh Points
0
Spectrum Monitors
0
*Upgrading and Rebooting counts only reflect APs registered on this controller.
The output of this command includes the following information:
Column
Total Up
Total Down
IPSEC Up
IPSEC Down
Command History
Introduced in ArubaOS 3.0.
712 | show ap database-summary
Total Up Total Down
RAP Rebooting*
-------- ----------
--------------
4 1
0
0 0
0
0 0
0
0 0
0
0 0
0
1 1
0
Description
Total number of APs with an up status.
Total number of APs with a down status.
Total number of APs with an active (up) IPsec tunnel.
Total number of APs with an inactive (down) IPsec tunnel.
Total Upgrading* Total Rebooting*
---------------- ----------------
0 0
0 0
0 0
0 0
0 0
0 0
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
RAP Up RAP
------ ------
0 0
0 0
0 0
0 0
0 0
0 0