Dell PowerConnect W-7200 Series Reference Manual page 430

Parameter
Usage Guidelines
There are eight logging severity levels, each with its associated types of messages. Each level also includes the levels
below it. For example, if you set the logging level to informational (6), all messages from level 0 through level 5 (from
emergencies through notifications) are also logged. The warnings severity level is set by default for all message
categories.
Only the logging level warnings security subcat ids and logging level warnings security subcat ids-ap subcategories
are enabled by default. Other subcategories are not generated by default even their severity is warning or higher.
Issue the logging level command to enable all other message subcategories.
Example
The following command logs critical system messages.
logging level critical system
Command History
Introduced in ArubaOS 2.5
Command Information
Platform
Available on all platforms
430 | logging level
Description
security: aaa, all, dot1x, firewall, ike, mobility, packet-trace, vpn, webserver
l
system: all, configuration, messages, snmp, webserver
l
user: all, captive-portal, dot1x, radius, vpn
l
user-debug: all, configuration
l
wireless: all
l
License
Available in the base operating system
Command Mode
Config mode on master and local
controllers
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide