Dell PowerConnect W-7200 Series Reference Manual page 1024

Parameter
Channel Increase Time
Channel Quiet Time
Channel Threshold
Node Time Interval
Node Quiet Time
Node Threshold
Related Commands
Configure the IDS Rate Threshold profile using the command
Command History
Version
ArubaOS 3.0
ArubaOS 6.0
Command Information
Platforms
Available on all platforms
1024 | show ids rate-thresholds-profile
Description
Time, in seconds, in which the threshold must be
exceeded in order to trigger an alarm.
The time that must elapse after a channel rate alarm before another identical alarm
may be triggered. This option prevents excessive messages in the log file.
Number of a specific type of frame that must be exceeded within a specific interval in
an entire channel to trigger an alarm.
Time, in seconds, in which the threshold must be exceeded in order to trigger an alarm.
The time that must elapse after a node rate alarm before another identical alarm may
be triggered. This option prevents excessive messages in the log file.
Number of a specific type of frame that must be exceeded within a specific interval for
a particular client MAC address to trigger an alarm.
Description
Command Introduced
Refreshed show output
Licensing
Requires the RFprotect license
ids rate-thresholds-profile.
Command Mode
Config mode on master controllers
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide